USAluminum specializes in Sunrooms, Screen Rooms, Screen Enclosures, Re-Screens and Repairs, Seamless Gutters, Patios, Porches, Fences, Railings, Decorative Screen Doors, Pavers and Concrete with best quality and Price Guaranteed for Florida Residents.

August 25th, 2011

Features and benefits of a concrete walkway:

»High Integrity Color

»Slip & Skid resistance

»Low Maintenance

US Aluminum Services is providing you with 9 simple steps on how to install a concrete walkway. You can also view these steps at doityourself.com

concrete walkway is an inexpensive and durable addition to a home’s landscape. This project requires thorough planning, simple tools, some elbow grease and a few days to complete. But the results can be well worth the effort.

Tools and Materials

  • Chalk dust or spray paint
  • Shovel
  • Gravel
  • 10-inch stakes
  • Twine
  • Tamping Tool
  • Mixed concrete
  • 1 foot x 4 inch x 4 inch-boards (for the forms)
  • Screws
  • Drill with a screw bit
  • Rake
  • 2×4-inch board (for smoothing the concrete)
  • Concrete float
  • Stiff Broom
  • Plastic tarp

Step 1 – Plan the Walkway

Decide the position of the walkway and mark the ground with chalk dust or spray paint. Then pound the stakes in along the excavated path so that they are 2 inches above ground. Then string them together with twine between them as a guideline.

Step 2 – Dig Out the Walkway

Remove the turf and then dig down until you have reached a depth of 8 inches. Level the soil and remove any stones. Now lay a 4-inch layer of gravel. Pack the gravel down and be sure it is level.

Step 3 – Build the Concrete Forms

Use the lumber to build forms to pour the concrete into. Screw the boards into the stakes that you placed along the path earlier. If you have planned curves in your plan you may need some laminated wood that bends more easily to create the curves. Use a level to be sure that the forms are level. The stakes should be below the top of the forms.

Step 4 – Pour the Concrete

Pour the concrete into the forms. Once it is poured rake over the concrete to level it.

Step 5 – Smooth the Concrete

Take a board and run it over the concrete resting it on the forms to smooth and level the concrete. Once it is fairly level then go over it with a concrete float held at an angle to do the final smoothing.

Step 6 – Edge the Walkway

Leave the concrete to cure for a couple of hours. Then separate the forms from the concrete by using an edging trowel.

Step 7 – Score the Expansion Joints

Expansion joints should be scored into the concrete every 4 feet. Use a board to create a straight line run the trowel along it. These joints allow the concrete to expand and contract and reduce cracking.

Step 8 – Cure the Concrete

Texture the concrete by sweeping with a stiff broom leaving a light texture on the surface. A texture keeps the concrete from being too smooth and slippery. Then the concrete should be covered with plastic tarping for at least two days. Rushing this process can interfere with the setting and durability of the concrete.

Step 9 – Remove the Forms

Once the concrete is dry and cured take the covering off. Carefully remove the forms and stakes. Fill in any soil needed next to the walkway and pack it down.

You may want to consider stamping the concrete or adding coloring to make the walkway more distinctive. A carefully installed concrete walkway will last for years and provides a useful and attractive part of your landscape.

Read more: http://www.doityourself.com/stry/how-to-install-a-concrete-walkway#b#ixzz1Tn7E6cO1

Below are a few pictures of finished jobs done in the Central Florida Area by US Aluminum Services:

Concrete walkway done by Us Aluminum Services

Concrete driveway done by Us Aluminum Services

  • admin (28)
  • Leave a Reply